Can Inflatable Hot Tubs Be Used Indoors?
One of the best things about inflatable hot tubs is that they portable hence you can move them easily from one place to another outside your backyard or perhaps moving them indoors. So, ‘can inflatable hot tubs be used indoors?’ Yes, they can. However, there are some things you must take into consideration before setting your inflatable hot tub indoors.
-
Water
When using the inflatable hot tub, especially when getting in and out, water will be dripping off you. As much as this isn’t a problem outside, you will want to be cautious if you have your carpet down. Besides, you may find yourself cleaning your wooden floor quite often. So, before setting you inflatable hot tub indoors, consider putting a plastic sheet beneath and then a few old towels to absorb splashed water and preventing your loved ones from sliding.
-
Steam
An inflatable hot tub can heat up to 40 degrees. When water is heat to this degree and is in use, it becomes steam thus making your indoor space damp, just like when having a hot shower or bath in your bathroom. Therefore, you can consider having your indoor space well ventilated before setting up your hot tub.
-
Weight
When your inflatable hot tub is set and filled with water, it will way a lot. The question you should ask yourself is, will your floor take this weight and is it supported enough for such a thing?
With these three things in mind, let’s look at the steps to follow when setting up your inflatable hot tub inside your home.
How to Set Up Your Inflatable Hot Tub Indoors
Step 1: Pick a Suitable Location
Before setting up your hot tub, the first thing to do is to pick a suitable spot for the setup. The perfect place is where you have easy access to the water supply as well as drainage. Consider setting it up where the floor getting wet isn’t a concern. Moreover, the ideal spot should be well-ventilated and able to support the weight of your hot tub when filled up with water and you inside.
Step 2: Take Your Time to Read the Owner’s Manual
Reading and understanding your inflatable hot tub’s manual will help you get familiar with the setup procedure for that particular hot tub. So don’t underestimate the importance of reading the owner’s manual and think it is a waste of time. You can also watch some videos over the internet to ensure you will set up your hot tub perfectly without any issues.
Step 3: Assemble it for Inflation
After going through the manual and probably watched some demos, you can assemble your inflatable hot tub on your ideal spot for inflation.
Step 4: Inflate it
Start to inflate the hot tub by plugging the pump in and fastening the inflation hose on both ends. Switch on the pump and let it inflate your tub to the recommended degree.
Step 5: Affix the Filter
Thrust the water filter into covering and pull the sheath onto the outer valve and fuse.
Step 6: Fill the Hot Tub with Water
If you have a garden hose and it is accessible, then use it to fill your inflatable hot tub. Check the “fill dash” if you aren’t sure how high you should fill it.
Step 7: Initiate the Heating Process
Locate the “heat” switch on the pump and press it to heat the water to your preferred temperature.
Step 8: Keep the Water Clean and Sanitized
You are always advised to keep the water in your inflatable hot tub sanitized and at the correct pH levels. You can do this by adding proper pool chemicals to maintain the water disinfected and clean always.
Granted, an indoor inflatable hot tub setup is certainly doable. Just take time to plan and the execution process will be hassle-free!
The Best Inflatable Hot Tubs
No products found.
